Shake it to distribute the soapy water, rinse really well and let it dry. This works especially well if you only use your bottle for water and non-staining liquids. Cleaning Tablets or Disinfectant Glass Cleaner: If you want a professional cleaning product to ensure that you bottle is properly disinfected, you can buy water bottle cleaning tablets or new technology disinfectant glass cleaner.
For the cleaning tablets, simply add the tablet to water and allow it to dissolve in the bottle. Give it a good shake and then an equally good rinse. Denture cleaning tablets are an inexpensive substitute for water bottle cleaning tablets. Just make sure to look for a name brand denture cleaning tablet that with extra strength cleaning power. Hydroflask bottles are not. Just remember: stainless-steel bottles use precise welds to maintain the vacuum insulation. Search Search. Keep it clean.
Justin Bailie. Twitter Icon. Hydration Bladder Jonathan Austen, director of sports and military product at CamelBak , says you should immediately drain and dry your reservoir after every use. Filed to: Hydration Packs Water Treatment.
These are handy to clean your bottle if you are camping or hiking. Fill the bottle with water and add the tablet. Let it soak for an hour before rinsing and drying the bottle.
Place the bottle in the top rack of the dishwasher. Nalgene bottles can be put in the dishwasher, but the bottle and the cap must be kept on the top rack away from the heating element.
This will prevent the bottle from melting in the dishwasher. Method 2. Put baking soda in the bottle. Baking soda can help remove strange smells and stains from the bottle. It is particularly helpful if you have kept a sticky drink in the bottle, such as juice. Measure out one-fourth cup of baking soda, and pour it into the bottle. Add water. Measure out about an eighth cup of warm or hot water, and pour into the bottle. You can use hot water from the tap, but do not use boiling water, as this can melt the bottle.
Shake the bottle. Screw the cap back onto the bottle. Shake or swirl the bottle to mix the solution together. This will also make sure that the solution spreads throughout the bottle. Fill the bottle with clean water from the tap, and dump it out. Keep doing this until there is no longer any baking soda left in the bottle. Once it is rinsed, let it dry upside down on a drying rack. Method 3. Pour bleach into the bottle. A little bit of bleach can help kill any mold that may be growing in the bottle.
Add cool water. Cool water helps bleach clean the bottle more effectively than warm or hot water. Pour water into the bottle up to its top line, and shake it to mix the solution together. Leave the bottle to soak overnight.
If the mold is really bad, you may want to leave the solution in the bottle overnight to soak. Screw the cap on, and leave it until the next day. Scrub away the mold. Sometimes just soaking the bottle will remove the mold, but in some cases, you may need to scrub to get all of the mold off. Stick a dish or bottle brush in the bottle, and scrub the areas where there is mold. If there is any mold on the cap or threads, dip a rag or dish brush into the solution, and wipe it around the moldy parts.
Pour out the bleach solution into a sink, and rinse with fresh water. If you are worried about ingesting bleach, you may want to rinse it again or put it through the dishwasher. Let it dry completely before using. Jonathan Tavarez Property Hygiene Enabler.
0コメント