Additionally, you may also notice a brown or black discoloration around it. Ground Fault Surges. Ground fault surges are similar to short circuits. They occur when a hot wire touches a ground wire that is made of bare copper or the side of a metal outlet box which is connected to the ground wire. This will cause more electricity to pass through it which the circuit cannot handle. The breaker trips in order to protect the circuit and appliances from overheating or from potential fires.
If ground fault surges occur, you can identify them through a discoloration around your outlet. If you avoid or overlook any of these problems, you are putting the safety of your home and loved ones at great risk. If you experience tripping of the circuit breakers quite frequently, it is time to call in the professionals to investigate the problem.
Do not try to handle this issue on your own. We have a wide range of high quality electrical supplies at competitive prices. It is an international clearinghouse, with , square facility located in Hayward, California. It keeps an extensive inventory of electrical connectors, conduit fitting, circuit breakers, junction boxes, wire cable, safety switches etc. It procures its electrical materials supplies from top-notch companies across the globe.
If you circuit breaker keeps tripping, there could be a serious issue, often caused by general wear and tear on the circuit breaker itself, requiring that a new one be installed. Repeated circuit breaker tripping caused by general wear and tear on the circuit breaker is usually due to one of the following issues:. If your circuit breaker keeps tripping, request a service call from Mr. Electric to inspect the situation. Electrical safety inspections are one of our specialties, and Mr.
Electric offers a level of convenience, safety, reliability, and professionalism that has served millions. Think your heating or cooling system might be using more energy than it should? Contact Aire Serv , part of the Neighborly family of home improvement experts.
Aire Serv can diagnose and service any issues you might be having with heating or cooling systems. Skip to main content. A short circuit happens when a hot, or active, electrical wire and a neutral wire touch, causing a large amount of current to flow and overload the circuit. A short circuit should always cause a breaker to trip or a fuse to blow and may also cause sparks, popping sounds and possibly some smoke.
It may also be caused by issues like loose connections, a slipped wire or even from damage caused by animals chewing on wires. A short circuit can be caused by a faulty electrical switch, receptacle, fixture, appliance, plug or cord. You can try to trace the short circuit, yourself or call a qualified electrician for help. A ground fault can happen when a hot or active wire makes contact with the ground wire, a grounded portion of the junction box or a grounded area of an appliance Hot wires are usually black, neutral wires are usually white, and ground wires are usually green.
When contact is made between a hot and ground wire large amounts of current go through the circuit breaker which can cause it to trip. Ground faults usually happen when equipment is damaged or defective and can pose danger since live electrical parts may no longer be adequately protected from unintended contact. Keep in mind that circuit breakers and fuses are actually safety devices for our protection when electrical malfunctions occur.
Although, it may be frustrating when a circuit breaker trips or when a fuse blows, this action has actually served to protect us and our property. Never repair electrical cords or equipment unless qualified and authorized.
Have a qualified electrician inspect electrical equipment that has gotten wet before energizing it. If working in damp locations, inspect electric cords and equipment to ensure that they are in good condition and free of defects, and use a ground fault circuit interrupter GFCI. The danger of a short circuit is in the potential for high levels of electricity to heat up the wiring or components of a fixture or appliance and cause a fire. In areas like kitchens and bathrooms, or outdoors areas, where the floor is likely to be damp, the danger is much more pronounced.
So, if you think you might have a ground fault, you should get it repaired immediately to prevent injury to you or your family. This is no job for the casual home handyman, either. If you have a home warranty with systems coverage, you can submit a request for service.
What causes a circuit breaker to trip repeatedly? There could be a short circuit in one of the appliances or somewhere in the wiring. There could be a ground fault causing the breaker to keep tripping. There could be a circuit overload.
Like anything else in your home, circuit breakers can go bad. Warning signs of a bad circuit breaker include:. An electrician can test for short circuits and ground faults, and safely fix them.
0コメント